exploit the possibilities
Home Files News &[SERVICES_TAB]About Contact Add New

host-detection.txt

host-detection.txt
Posted Jan 15, 2001
Authored by synnergy, Dethy | Site synnergy.net

Advanced Host Detection - Techniques To Validate Host-Connectivity. Security Engineers spend a tireless amount of effort to block and filter packet anomalies in an internetwork connected environment. Advanced host mapping bypasses many forms of intrusion detection systems, filters, and routers, essentially enabling an attacker to map and discover previously unknown firewalled hosts. Also available in DOC form.

tags | paper, protocol
SHA-256 | c637cd2c806c90bbcf3e707e1c72035f73fcc09ee0e3815a1797cf12bc6a9636

host-detection.txt

Change Mirror Download
Advanced Host Detection

Techniques To Validate Host-Connectivity

whitepaper by dethy
dethy@synnergy.net

Abstract

Security Engineers spend a tireless amount of effort to block and filter
packet anomalies in an internetwork connected environment. Advanced host
mapping bypasses many forms of intrusion detection systems, filters, and
routers, essentially enabling an attacker to map and discover previously
unknown firewalled hosts.


Introduction

This paper will attempt to describe techniques used to discover heavily
filtered and firewalled hosts, that will not answer to standard PING
responses. It is assumed that the reader has a firm knowledge of the major
internet protocols (TCP,IP,UDP,ICMP). Most other protocols will not be
discussed but techniques described here can be applied to many protocols.


Host Detection Methods

It is becoming increasingly apparent the amount of firewalled and filtered
hosts connected to the internet nowadays. Misconfigured and intrinsically
firewalled hosts often block packet responses and replies that determine their
(inter)network connectivity. A prime example of this scenario is the standard
PING (packet internet groper) utility. PING issues an ICMP type 3 (echo
request) response to an arbitrary host to test for it's online connectivity.
However, since a growing number of these servers block many forms of ICMP code
types, a reply will often be blocked, dropped and thus undelivered.
Unfortunately, a client may then assume the network or host is down or
inconveniently firewalled.

Exactly how can one knowingly detect the online presence of a host ?

Understanding avenues which can circumvent certain levels of firewall
rulesets, will ultimately allow a client to determine whether a host is
network connected and/or behind a filtered environment. This technique is
known as 'Host Detection.

Host detection is similar to scanning in several ways although host detection
does not test for the absence of packets to ports or modifications pertaining
to protocol headers, ie setting flagged packet replies, but rather tests any
responsiveness signs of issued from the remote host. In this respect, host-
detection is a form of PING scanning, that is detecting any form of response
to signify the apparent connective state of a server.

This paper analyses two broad 'PING sweep' host detection techniques that can
be used in a (inter)networked environment for advanced host mapping.


* eliciting valid protocol responses
* generating invalid server-side protocol responses


The first method includes eliciting valid responses from supported protocols
on a host. Any valid request from a client issued to a server over
TCP/IP/UDP/ICMP that will assume a reply, in terms of an answered request, is
confined into this category. Such methods include:

* UDP Echo
* TCP Echo
* UDP Closed Ports
* TCP ACK
* TCP SYN
* TCP SYN|ACK
* TCP FIN
* TCP NULL FLAGS
* TCP XMAS
* ICMP Echo Request (Type 8)
* ICMP Broadcast
* ICMP Router Solicitation (Type 10)
* ICMP Timestamp Request (Type 13)
* ICMP Information Request (Type 15)
* ICMP Address Mask Request (Type 17)


Opposing these RFC-compliant replies are the underlying methods to generate
invalid responses from the target host in order to determine its hidden
presence. Of course receiving a reply from any of these methods will allow us
to knowingly detect whether a host is online and/or firewalled. These methods
include:

* Timedout Packet Fragmentation
* Invalid IP Header Length
* Invalid IP Field Values


Eliciting Valid Protocol Requests

The first definitive category of host detecting takes place in the form of
eliciting valid protocol queries. Several such methods are included using
valid packet requests.

* Echo port method
* UDP method
* TCP FLAG method
* ICMP request method

All of the above categories are possible methods that allow any arbitrary
client to request a returned packet reply in order to determine it's
interconnectivity. As such, the packets returned and transmitted are valid
protocol responses, and thus is differentiated from generating invalided
responses since each request correctly uses TCP/IP/UDP/ICMP protocols without
mangling any of the available fields.


ECHO Port Method

This old-fashioned and outdated technique used to determine a host
responsiveness at a very basic level can be still used on poorly/misconfigured
UNIX hosts. Most often a security conscious administrator will block traffic
to port 7 TCP/UDP or disable this service which
runs from inetd.


TCP/Echo Port

This simplistic method uses a standard three-way TCP handshake that aims to
establish a connection to the echo port (7/tcp). If a connect()'ion is
established the host is then assumed as being online and thus the host
detection sequence has taken place at this very basic level. As such, since
the three-way handshake along with the potential of the echo port being open
and even firewalled, makes this method highly restricted and problematic.

Although most UNIX/Linux distributions have made the echo port disabled by
default it is still in use on many systems. The diagnostical purposes that
this server was initially set out to achieve has become far out-weighted by
the security implication that it opens up as a result of the increasing
traffic that it may generate on a connecting client (which in turn diminishes
it's own bandwidth and system processor performance).

Since three-way handshaking begins with an initial SYN flag packet and
receives a SYN|ACK in reply, a client does not need to continue with the
handshaking paradigm in order to determine the hosts responsivesness. Not
only would it log but it has the highest chance of being noticed and
consecutively blocked by the arbitary host. As such misconfigured or
simplistic configuration of a firewall would allow packets with the SYN flag
set to pass through. Noteably, this is why the TCP echo port method should
only be used as a last resort - and even then it's not a wise idea, unless
your aim is to inevitably trigger most forms of intrusion detection systems
(IDS) and alarm prudent systems administrators.

An example of using this method in a networked environment could be
accomplished through telnet.

dethy@dev:~ $ telnet XXX.XXX.XXX.XXX 7
Trying XXX.XXX.XXX.XXX...
Connected to XXX.XXX.XXX.XXX
Escape character is '^]'.
Hello.
Hello.


As shown above, the remote host replies to our initial 'Hello.' with its own
'Hello.', obviously the server is responsive. Creating a scanner for such a
method wouldn't necessarily need to send any garbled data to the port, an
established connection is all that is required.

Note: Other methods to determine whether this service is running on a remote
host which avoid the TCP three-way handshake could alternatively be used for
such purposes as defeating packet loggers.
Check http://www.synnergy.net/Archives/Papers/dethy/portscan.pdf for a further
discussion of advanced port scan techniques.


UDP/Echo Port

Similarly to the TCP echo port method, the UDP port 7 will answer a clients
datagram with it's own UDP datagram. Since the packet block initially sent is
replied with an answer from a remote host, we know the host is alive.

Using hping (available from http://www.kyuzz.org/antirez/hping2.html) as our
packet generator we send the following:

dethy@dev:~ # hping XXX.XXX.XXX.XXX -c 1 -2 -p 7
eth0 default routing interface selected (according to /proc)
HPING XXX.XXX.XXX.XXX (eth0 XXX.XXX.XXX.XXX): udp mode set, 28 headers + 0
data bytes
50 bytes from XXX.XXX.XXX.XXX: seq=0 ttl=64 id=1255 rtt=0.9 ms


UDP Method

This next technique involves the User Datagram Protocol and it's known
responsiveness to closed ports. This clandestine packet reply is taken from
the known UDP port scan method. The logic involved with this is by sending a
UDP datagram to a closed, NON- LISTENING port, the arbitrary host should
respond with an ICMP_PORT_UNREACH error message. Since this host returns such
a response, we are then able to determine and indicate it's connectivity - and
thus is assumed alive.

The cycle for this method is as follows:

* client -> UDP (to closed port)
* server -> ICMP_PORT_UNREACH


dethy@dev:~ # hping XXX.XXX.XXX.XXX -c 1 -2 -p 65
eth0 default routing interface selected (according to /proc)
HPING XXX.XXX.XXX.XXX (eth0 XXX.XXX.XXX.XXX): udp mode set, 28 headers + 0
data bytes
ICMP Port Unreachable from XXX.XXX.XXX.XXX (XXX.XXX.XXX.XXX)


Predicting a closed port is fairly simple. Try choosing a high port (greater
than 1024 and less than 65536). Of course if a reply to a UDP datagram is
not sent back to the client, evidence shows that this packet would have
been dropped by the kernel since the destination port would have been
open or a filtering system has blocked the packet. Naturally, if this scenario
occurs choose another port to test for responsiveness (one that is closed).

Caution is to be taken with UDP packets, however. Since UDP are often dropped
during transmission, and/or blocked by firewalls, a replied ICMP_PORT_UNREACH
may not even arrive to the client at all. In this instance retransmission
should take place for added certainty.


TCP FLAG Methods

Streaming various flagged packets over a network is perhaps the most effective
method to determine the connectivity of a host. Since these packets are
elusive in terms of transmission and presents itself as normal day to day
traffic, they are rather difficult to differentiate between intrusive
information gathering packets and harmless inbound traffic. All that is
required for this host detection technique to be successful is a single
flagged packet unlike the aforementioned TCP/UDP echo port method, involving
three-way handshaking.


TCP SYN Approach

This SYN flag method is a highly successul PING sweep implementation. Since a
response is replied to any SYN packet on a closed or open port, it allows a
client to be certain in detecting the presence of a host machine.

Manipulating the packet header to contain the SYN flag and transmitting this
to an open port will return a packet with the SYN|ACK bits set. If no packet
is returned at all, then a client may assume the host is firewalled, or
or the port filtered.


dethy@dev:~ # hping XXX.XXX.XXX.XXX -c 1 -S -p 23
eth0 default routing interface selected (according to /proc)
HPING XXX.XXX.XXX.XXX (eth0 XXX.XXX.XXX.XXX): S set, 40 headers + 0 data bytes
50 bytes from 192.168.1.1: flags=SA seq=0 ttl=64 id=1252 win=32696 rtt=0.9 ms


As displayed the SA (SYN|ACK) is set in the returned packet. Being a blind
client, one that does not completely know whether a port is open or closed
does not matter in this host detection method. Since both open/closed ports
will respond to the SYN packet, we do not particularly need to send the
initial packet with knowledge of the state of the port whether open or closed.

An example sending a SYN to a closed port is shown below.


dethy@dev:~ # hping XXX.XXX.XXX.XXX -c 1 -S -p 2
eth0 default routing interface selected (according to /proc)
HPING atlanta (eth0 XXX.XXX.XXX.XXX): S set, 40 headers + 0 data bytes
50 bytes from XXX.XXX.XXX.XXX: flags=RA seq=0 ttl=255 id=1254 win=0 rtt=0.7 ms

The RA (RST|ACK) flags returned in this packet are indicative of a closed ports
response. Since we receive a returned packet, we know the host is alive.


TCP ACK Approach

This method is arguably the most effective approach for PING scanning on a
remote host. Flagging the ACK bit in the TCP header and transmitting the
packet to an open or closed port should return a packet with the reset(RST)
bit flagged. Evidently this method is disguised as normal traffic but also is
flexible in that an open/closed port will not deter the end result. The state
of the port for this method is not restrictive as stated, lucratively enabling
a client to query a target on any given port (1-65536) and almost guaranteed a
response.

Of course, hosts may disregard these packets with an effective rule base for
routers, and firewalls. It is favorably plausible to determine whether a host
is protected by some sort of filtering system through using a combination of
the techniques this paper describes. Example, if a machine is found to be
blocking TCP echo port connection, and no returned packets are replied at all,
then using the TCP ACK approach directed to the echo port 7 will help enable
the client to predict and spot rulesets by using the TCP ACK method as a
diagnostical assumption. The server may reply with the RST bit, meaning:

* TCP echo port 7 is filtered by some arbitrary ruleset
* Packets with the SYN flag enabled are blocked to port 7
* TCP ACK packets are allowed through

All of the above are ostensibly obvious, but perhaps the assumption made about
the SYN but may seem incorrect. However, through a process of elimination we
know that the echo port is filtered, and we know that to establish a
connection on this port we need to use the three-way handshaking negotiation,
which involves the following responses:

SYN -> SYN|ACK -> ACK

Now we also know that the ACK packets returned the client with the RST
bit in response. Eliminating the ACK flag from the above equation, we end
up with SYN and SYN|ACK. Since the SYN flag is transmitted first from the
client to the target and a SYN|ACK response is not being returned from the
target we are able to cancel the SYN|ACK bit (since the SYN packet was not
actually received, by means of some firewall blocking it's transmission).
Therefore, by some ruleset or firewall, packets matching the SYN flag are
dropped on the receivers end. This is a technique known as firewalking, that
is analysing the types of packets that are and aren't allowed through in order
to map the types of rulesets an arbitrary host has implemented (and those it
has not).

Using HPING to issue an ACK packet to a closed and then an open port outputs
the following:


dethy@dev:~ # hping XXX.XXX.XXX.XXX -A -c 1 -p 2
eth0 default routing interface selected (according to /proc)
HPING XXX.XXX.XXX.XXX (eth0 XXX.XXX.XXX.XXX): A set, 40 headers + 0 data bytes
50 bytes from XXX.XXX.XXX.XXX: flags=R seq=0 ttl=255 id=1048 win=0 rtt=0.5 ms


The -p argument denotes the port in which to send the packet. In this instance
packet transmission was directed to port 2 (a NON-LISTENING port).


dethy@dev:~ # hping XXX.XXX.XXX.XXX -A -c 1 -p 23
eth0 default routing interface selected (according to /proc)
HPING XXX.XXX.XXX.XXX (eth0 XXX.XXX.XXX.XXX): A set, 40 headers + 0 data bytes
50 bytes from XXX.XXX.XXX.XXX: flags=R seq=0 ttl=255 id=1052 win=0 rtt=0.5 ms


where port 23 was an open, LISTENING port.

As is shown, both replies from the XXX.XXX.XXX.XXX host responded with the RST
flag on open and closed ports. Thus we have verified this host exists(online).


TCP SYN|ACK Approach

This method is not the most flexible in terms of compatibility. BSD networking
code does not send any flagged packet back to a SYN|ACK query packet, hence is
architecture dependant. However, Linux/Windows detection (and others) can be
obtained successfully with this technique.

A SYN|ACK packet is initially sent to an arbitrary port (open/closed state
does not matter). The returned packet should be set with the RST bit in reply.
Since the state of the port plays no role in this scenario, any random port
could be used as the testing port.

The example shown below is a SYN|ACK packet issued to a Win95 machine with a
non-listening port (23). The result is an RST flagged packet.


dethy@dev:~ # hping XXX.XXX.XXX.XXX -c 1 -S -A -p 23
eth0 default routing interface selected (according to /proc)
HPING XXX.XXX.XXX.XXX (eth0 XXX.XXX.XXX.XXX): SA set, 40 headers + 0 data bytes
50 bytes from XXX.XXX.XXX.XXX: flags=R seq=0 ttl=128 id=31029 win=0 rtt=0.5 ms


Likewise, the same packet is issued to a Linux machine except with a listening
port on 23. The result is once again, an RST flagged packet.


dethy@dev:~ # hping XXX.XXX.XXX.XXX -c 1 -S -A -p 23
eth0 default routing interface selected (according to /proc)
HPING XXX.XXX.XXX.XXX (eth0 XXX.XXX.XXX.XXX): SA set, 40 headers + 0 data bytes
50 bytes from XXX.XXX.XXX.XXX: flags=R seq=0 ttl=255 id=1258 win=0 rtt=0.5 ms


TCP FIN Approach

Much more clandestine in approach is the TCP FIN host scan technique. Issuing
a packet with this flag set to a closed port will return an RST|ACK packet
from the remote host. Alternatively an open port will discard the packet and
hence is useless to us as host detection extraodinaires.

Locating a closed port is clearly basic, take a random guess at a port above
the reserved services(1-1024) where the abundance on the unserviced ports
remain.


dethy@dev:~ # hping XXX.XXX.XXX.XXX -c 1 -F -p 2
eth0 default routing interface selected (according to /proc)
HPING XXX.XXX.XXX.XXX (eth0 XXX.XXX.XXX.XXX): F set, 40 headers + 0 data bytes
50 bytes from XXX.XXX.XXX.XXX: flags=RA seq=0 ttl=255 id=1260 win=0 rtt=0.5 ms


The outbound packet was sent to a closed port with the RST|ACK bit replied.
Since we our queried packet was replied by the server, we know the host
is alive and well.

Alternatively the query packet does not invoke a reply from the remote host any
of the below concepts may tell us why.

* inbound FIN packets blocked by firewall/router/ACLS
* inbound traffic to that port is filtered
* the queried port was open (try another port)
* host is down (unconnected from the (inter)network)


TCP NULL Approach

This method involves unsetting all the flags in the TCP header and sending the
packet to a closed, NON-LISTENING port. The reply should be a packet with the
RST|ACK bits set. An open port will not respond to this packet (discarded), so
once more choose a port that is known to have no services running by default.

An example of this closed port state along with no flags set is displayed
below.

dethy@dev:~ # hping XXX.XXX.XXX.XXX -c 1 -p 2
eth0 default routing interface selected (according to /proc)
HPING XXX.XXX.XXX.XXX (eth0 XXX.XXX.XXX.XXX): NO FLAGS are set, 40 headers + 0
data bytes
50 bytes from XXX.XXX.XXX.XXX: flags=RA seq=0 ttl=255 id=1267 win=0 rtt=0.5 ms


Defining a port to be used as the testing port for this host detection is a
relatively easy choice. The results for this scan can often go undelivered to
the client since ACL's and rulesets particularly check for unflagged packet
queries. This method therefore, will not be as effective as the aforementioned
ACK and SYN techniques, but of course is a useful method if the host does not
answer to standard ICMP type 8 echo requests.


TCP XMAS Approach

Similarly to the NULL flag header host detection method, XMAS scanning tests a
closed ports response to a packet that has enabled all bits of the TCP header
flags: SYN, ACK, FIN, RST, URG, PSH (the two reserved bits do not modify
the outcome). This method is based on the UNIX/Linux/BSD TCP/IP stack
implementation and will not always successfully work against Windows
operating systems.


dethy@dev:~ # hping XXX.XXX.XXX.XXX -c 1 -p 2 -F -S -R -P -A -U -X -Y
eth0 default routing interface selected (according to /proc)
HPING XXX.XXX.XXX.XXX (eth0 XXX.XXX.XXX.XXX): RSAFPUXY set, 40 headers + 0
data bytes
50 bytes from XXX.XXX.XXX.XXX: flags=RA seq=0 ttl=255 id=1380 win=0 rtt=0.6 ms


The RST|ACK bits are indicative that the host received our reply and has
confirmed it with its own transmitted packet. Therefore the client interprets
the arbitrary host as being alive and network connected.

Since open ports do not respond to this malformed packet request, using an
open port for host detection is trivial.


Comments

From the above information, circumstantial evidence suggests that host
detection of some arbitrary host is easily identifible if that host is running
a UNIX/Linux/BSD derivative since these operating systems answer many
malformed packet requests. Contrastedly, Windows based operating systems have
a tendancy to drop many anomalistic traffic, which ultimately prevents these
hosts from being successfully detected (but not transparent to many of the
scans detailed above) in a (inter)networked environment.


ICMP Methods

The Internet Control Message Protocol(ICMP) is used for reporting errors in
datagram processing, and is an integral part of IP. ICMP has not especially
been well-researched as a form of host detection until recently a whitepaper
written by Ofir Akfin describes ways ICMP can be used in a number of
scenarious, including fingerprinting and inverse mapping.

With information security and it's importance on the increase, system analysts
are implementening ACL's and an effective rulebase to block all forms of ICMP.
Although not all forms are considered lethal (smurf broadcasts, excessive
unreachable error replies) many forms of ICMP aid server communication in a
networked environment (timestamping for example).

Host detection disregards the type of ICMP that is filtered and look for any
signs of life elicited through some arbitrary ICMP type datagram. Today, most
hosts have some form of filtering against ICMP type 8 (echo request) but have
left other types, all the better for host detection.


ICMP Echo Request (Type 8)

PING? PONG! At last we reach the standard and mandatory method used for host
- detection. The 'PING' network diagnostic utility elicits ICMP echo_request
datagrams to analyse network connectivity. An echo_reply Type 0 ICMP datagram
will be returned if the host is active(online).

Since this method was designed to be the standard method for host detection
recognition; firewalls, routers, ACLs have designed their rulesets around this
fact and have consequently blocked all forms of ICMP Type 8 inbound network
traffic. This gives reasons to all the other techniques described above which
evade standard echo responses (and are just as successful).

Focussing more directly at the ICMP Type 8 packet reveals the following:

0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type | Code | Checksum |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Identifier | Sequence Number |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Data |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+


A generic response is as follows:


dethy@dev:~ # hping -1 XXX.XXX.XXX.XXX -c 1 -C 8
eth0 default routing interface selected (according to /proc)
HPING XXX.XXX.XXX.XXX (eth0 XXX.XXX.XXX.XXX): icmp mode set, 28 headers + 0
data bytes
50 bytes from XXX.XXX.XXX.XXX: icmp_seq=0 ttl=255 id=1273 rtt=0.4 ms


As is displayed 50 bytes of the ICMP echo_reply were returned from the target
host. Similarly, as is the case with other methods since we received an
answered packet the host is assumed alive.


ICMP Broadcast

Broadcasting is a way of transmitting packets to all connected hosts of a
network by sending an echo request(Type 8) to the network or broadcast address.
The results will be a magnification of the first initiated packet with each
networked host sending their own reply back to the instigating client.

In fact, ICMP Broadcasting is an extremely useful method to map an arbitrary
network's interconnected computers. Since each echo query is answered, it
allows simple host detection for a prober to discover an entire network.
However, there is a drawback. By default Windows computers (except NT 4 with
Service Pack < 4) do not answer to ICMP Type 8 echo request packets directed
to the broadcast or network address but instead silently discards any such
packets. Once again it becomes apparent that Windows boxes can be rather
elusive in terms of remote host detection.

Below is an example of an ICMP echo request packet sent to the network address
of some server.
Note: The XXX.XXX.XXX.4 IP address did not return any reply since
it was a Windows95 box.


dethy@dev:~ # hping -1 XXX.XXX.XXX.0 -c 2
eth0 default routing interface selected (according to /proc)
HPING XXX.XXX.XXX.0 (eth0 XXX.XXX.XXX.0): icmp mode set, 28 headers + 0
data bytes
28 bytes from XXX.XXX.XXX.3: icmp_seq=0 ttl=255 id=13013 rtt=0.4 ms
50 bytes from XXX.XXX.XXX.1: icmp_seq=0 ttl=255 id=426 rtt=0.6 ms
50 bytes from XXX.XXX.XXX.2: icmp_seq=0 ttl=255 id=15319 rtt=0.8 ms

--- XXX.XXX.XXX.0 hping statistic ---
1 packets tramitted, 3 packets received, -100% packet loss
round-trip min/avg/max = 0.4/0.6/0.8 ms


It is noticed that the single transmitted packet received three replies when
directed to the network address.

Alternatively, a packet sent to the broadcast address will likewise produce
three answered reply datagrams.


dethy@dev:~ # hping -1 XXX.XXX.XXX.255 -c 2
eth0 default routing interface selected (according to /proc)
HPING XXX.XXX.XXX.255 (eth0 XXX.XXX.XXX.255): icmp mode set, 28 headers + 0
data bytes
28 bytes from XXX.XXX.XXX.3: icmp_seq=0 ttl=255 id=13098 rtt=0.4 ms
50 bytes from XXX.XXX.XXX.1: icmp_seq=0 ttl=255 id=730 rtt=0.7 ms
50 bytes from XXX.XXX.XXX.2: icmp_seq=0 ttl=255 id=15327 rtt=0.8 ms

--- XXX.XXX.XXX.255 hping statistic ---
1 packets tramitted, 3 packets received, -100% packet loss
round-trip min/avg/max = 0.4/0.7/0.8 ms


Once again, this technique has shown a successful method using address
broadcasting as a network host mapping mechansism.


ICMP Router Solicitation (Type 10)

The ICMP router discovery requests are called Router Solicitations. Each
router periodically multicasts a Router Advertisement (ICMP Type 9) from each
of its multicast interfaces, which in turn announces the IP address(es) of
that interface.

This technique is useful for discovering a system acting as a Router. It is
known that ICMP Router Solication is an optional message format on a standard
host. However, it is mandatory for a router to have enabled the ICMP Router
Solication implementation. Thus, if servers respond with an ICMP Type 9 in
reply to an ICMP Type 10, one can be fairly certain that the server is a
router or network device. Needless to say, a host that receives an ICMP Type
10 but is not configured to transmit these messages, can not send back a reply.

The packet format for a router discovery messages looks like the following:

0 1 2 3
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 31
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type | Code | Checksum |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Reserved |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+


(Unfortunately hping has not implemented ICMP Type 10,13,15,17, message
formats. Instead icmpush (available from http://hispahack.ccc.de) has been
alternatively selected as the packet generating/analysing utility).

dethy@dev:~ # ./icmpush -vv -rts XXX.XXX.XXX.XXX
-> Outgoing interface = XXX.XXX.XXX.XXX
-> ICMP total size = 20 bytes
-> Outgoing interface = XXX.XXX.XXX.XXX
-> MTU = 1500 bytes
-> Total packet size (ICMP + IP) = 40 bytes
ICMP Router Solicitation packet sent to XXX.XXX.XXX.XXX (XXX.XXX.XXX.XXX)

Receiving ICMP replies ...
XXX.XXX.XXX.XXX -> Router Advertisement (XXX.XXX.XXX.XXX)
./icmpush: Program finished OK


Another successful hit! We know we have found a Router on this network.
Perhaps the Router is filtering other ICMP types or perhaps blocking ports,
but fortunately this paper has discussed alternative methods to bypass these
forms of ACL.


ICMP Timestamp Request (Type 13)

The reply (ICMP Type 14) within a timestamp request is the initial request
data additionally with the remote hosts timestamp. Obviously, timestamps
requests are made in order to query a server for the current time.

Often cross platform compatibility issues lend a hand when requesting a
timestamp reply. Windows95 and WindowsNT did not answer queries that were
sent, UNIX/Linux/BSD replied with the correct data.

Taking a look at the ICMP packet itself reveals the following:

0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type | Code | Checksum |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Identifier | Sequence Number |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Originate Timestamp |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Receive Timestamp |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Transmit Timestamp |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+


The first example shown below transmits an ICMP timestamp request to a Linux
server, the result was 03:50:32 encapsulated within the data field.


dethy@dev:~ # ./icmpush -vv -tstamp XXX.XXX.XXX.XXX
-> Outgoing interface = XXX.XXX.XXX.XXX
-> ICMP total size = 20 bytes
-> Outgoing interface = XXX.XXX.XXX.XXX
-> MTU = 1500 bytes
-> Total packet size (ICMP + IP) = 40 bytes
ICMP Timestamp Request packet sent to XXX.XXX.XXX.XXX (XXX.XXX.XXX.XXX)

Receiving ICMP replies ...
XXX.XXX.XXX.XXX -> Timestamp Reply transmited at 03:50:32
./icmpush: Program finished OK


The next example issued the same packet but to a Windows95 computer, no
returned packet was captured.


dethy@dev:~ # ./icmpush -vv -tstamp XXX.XXX.XXX.XXX
-> Outgoing interface = XXX.XXX.XXX.XXX
-> ICMP total size = 20 bytes
-> Outgoing interface = XXX.XXX.XXX.XXX
-> MTU = 1500 bytes
-> Total packet size (ICMP + IP) = 40 bytes
ICMP Timestamp Request packet sent to XXX.XXX.XXX.XXX (XXX.XXX.XXX.XXX)

Receiving ICMP replies ...
./icmpush: Program finished OK


ICMP Timestamp request us a healthy method to use for host detection,
particularly *NIX servers.


ICMP Information Request (Type 15)

This message is used to query a host to discover it's network address, however
as the RFC states, ICMP Type 15 (Information Request) and ICMP Type 16
(information reply) are obsoleted, but that's not to say it's still not in use
in the wild. :)

A cross section of this ICMP type reveals the following:

0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type | Code | Checksum |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Identifier | Sequence Number |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+


A packet with ICMP Type 15 was sent to a host which in turn answered the
request, and thus gave indication of it's existence to some arbitrary host.


dethy@dev:~ # ./icmpush -vv -info XXX.XXX.XXX.XXX
-> Outgoing interface = XXX.XXX.XXX.XXX
-> ICMP total size = 8 bytes
-> Outgoing interface = XXX.XXX.XXX.XXX
-> MTU = 1500 bytes
-> Total packet size (ICMP + IP) = 28 bytes
ICMP Info Request packet sent to XXX.XXX.XXX.XXX (XXX.XXX.XXX.XXX)

Receiving ICMP replies ...
XXX.XXX.XXX.XXX -> Info Reply (XXX.XXX.XXX.XXX)
./icmpush: Program finished OK


Once again, I could not reproduce these results against a Windows 95/NT
system, but several *NIX distribution replied successfully.


ICMP Address Mask Request (Type 17)

Address mask requests are generated to obtain the subnet mask address on the
local network. The response to this initial query packet will be an ICMP Type
18 (Address Mask Reply), which should contain the subnet address.

A detailed look at the ICMP Address Mask reveals the following:

0 1 2 3
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 31
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type | Code | Checksum |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Identifier | Sequence Number |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Subnet Address Mask |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+


Funnily enough issuing this ICMP type to various Linux boxes did not return an
ICMP Type 18 reply, however, Windows systems did.
The example below shows the result of the Address Mask Request packet
initiated against a Windows box.


dethy@dev:~ # ./icmpush -vv -mask XXX.XXX.XXX.XXX
-> Outgoing interface = XXX.XXX.XXX.XXX
-> ICMP total size = 12 bytes
-> Outgoing interface = XXX.XXX.XXX.XXX
-> MTU = 1500 bytes
-> Total packet size (ICMP + IP) = 32 bytes
ICMP Address Mask Request packet sent to XXX.XXX.XXX.XXX (XXX.XXX.XXX.XXX)

Receiving ICMP replies ...
XXX.XXX.XXX.XXX -> Address Mask Reply (255.255.255.0)
./icmpush: Program finished OK


So the subnet mask was received at our end. Yet another host detection method
is feasible against Windows systems to use for host mapping in a cross
platform network environment that blocks ICMP echo requests.


Comments

Some readers may be thinking why not elicit ICMP reply's to hosts and analyse
their response to use for host detection. RFC 1122 meaningfully states the
following:

An ICMP error message MUST NOT be sent as the result of receiving:
* an ICMP error message, or
* a datagram destined to an IP broadcast or IP multicast
address, or
* a datagram sent as a link-layer broadcast, or
* a non-initial fragment, or
* a datagram whose source address does not define a single
host -- e.g., a zero address, a loopback address, a
broadcast address, a multicast address, or a Class E
address.

The first point clearly states that a host will not issue a response to
an ICMP reply datagram, so much for host detection using reply datagrams. Oh
well time put your thinking caps on once more. :)


Generating Invalid Protocol Responses

This section describes methods using the Internet Protocol (IP) to divulge
error messages in order to discovery arbitrary hosts. The corresponding
encapsulated protocol (TCP/UDP/ICMP) has no effect on the results using this
method when packaging the datagrams.

The foundation for analysing the connectivity of a host against this method
emphasises the need for effective ACL's and outgoing packet filtering. The
basis for this technique relies on generating invalid datagrams and detecting
external responses that the malformed packet creates as a result of the
abnormality.


IP Header Approach

Creating anomalistic IP headers in transmission will help increase the chances
of detecting a firewalled and filtered host. Many forms of intrusion detection
systems and routers do drop packets that contain malformed headers such as
invalid field values. The techniques below list such scenarios.

* Timedout Packet Fragmentation
* Invalid Header Length
* Invalid Field Values


Timedout Packet Fragmentation

Another method used in advanced host detection is unsent packet fragmenting.
It is firstly necessary to construct a packet with a fragmented offset and
send to a host. Instead of assembling another fragmented datagram to complete
the packet, the client will let the initial fragmented datagram timeout,
leaving the server waiting for the next expected packet in the sequence. The
effect of this is an elicited ICMP Type 11 Code 1 Time Exceeded Fragment
Reassembly generated by the server.

Example:

dethy@dev:~ # hping -c 1 -x -y XXX.XXX.XXX.XXX
eth0 default routing interface selected (according to /proc)
HPING dev (eth0 XXX.XXX.XXX.XXX): NO FLAGS are set, 40 headers + 0 data bytes

--- dev hping statistic ---
1 packets tramitted, 0 packets received, 100% packet loss
round-trip min/avg/max = 0.0/0.0/0.0 ms


Note: Although hping returns 100% packet loss, if does not check for the ICMP
datagram the remote host generated.

tcpdump shows the following information:


20:41:09.309085 YYY.YYY.YYY.YYY > XXX.XXX.XXX.XXX: icmp: ip reassembly time
exceeded [tos 0xc0] (ttl 255, id 3375)


Once again we have produced a response from a server using invalid protocol
communication.


Invalid Header Length

Specifying an invalid header length within an IP header will result in the
remote host generating an ICMP Type 12 - Parameter Problem error message. The
Code type of this within this ICMP datagram may be equal to either of the
following:

0 - Pointer indicates the error
2 - Bad Length

A code equal to 0 will return the exact byte which caused the error
encapsulated within the pointer field. Alternatively a code equal to 2
signifies the entire packet contains errors. In either case, the host on the
receiving end of this packet solicits the ICMP Type 12 Code (0 | 2) in return
to tell the sender that the packet has been discarded or dropped.

Below ISIC (IP Stack Integrity Checker) was used to assemble a packet with an
incorrect IP header length of 66 bytes.


dethy@dev:~ # ./isic -s YYY.YYY.YYY.YYY -d XXX.XXX.XXX.XXX -p 1 -V 0 -F 0 -I 66 -D
Compiled against Libnet 1.0.1b
Installing Signal Handlers.
Seeding with 5099
No Maximum traffic limiter
Bad IP Version = 0% Odd IP Header Length = 100% Frag'd Pcnt = 0%
YYY.YYY.YYY.YYY -> XXX.XXX.XXX.XXX tos[137] id[0] ver[4] frag[0]

Wrote 1 packets in 0.00s @ 5649.72 pkts/s

tcpdump trace revealed the following:

21:39:03.755839 XXX.XXX.XXX.XXX > YYY.YYY.YYY.YYY: icmp: parameter problem -
octet 20 [tos 0xd0] (ttl 255, id 21508)


As was expected, a malformed header length forced an arbitrary response from
the server. This method ultimately could be used to bypass many forms of ACL's
and filtering systems if not correctly configured.


Invalid Field Values

On a more general level, specifying invalid values within any fields of the IP
header will produce ICMP errors messages on the target host. Such a case is
with the IP PROTO field, which has a total of 8 bits in length and hence has
a possible total of 256 (2^8) combinations. The trick involved in this
instance is by electing a protocol value that is not indicative of a legal
protocol value on that host.

Fortunately a client is able to determine if a host does not support a
protocol, as the server will generate an ICMP Type 3 Code 3 - Destination
Unreachable Protocol Unreachable. If a response is not sent back, the client
assumes that this protocol specified is supported on that host.

For the next example apsend (http://www.elxsi.de) was used to generate the
packet.


dethy@dev:~ # perl apsend -s YYY.YYY.YYY.YYY -d XXX.XXX.XXX.XXX -b 8 -p 8
--protocol 0
Packet: 1 from YYY.YYY.YYY.YYY(port: 8) to XXX.XXX.XXX.XXX(port: 8).
Protocol: 0 Type of Service(ToS): 16 ID: 0


In the above example the datagram was sent with a protocol equal to 0, and
thus should always return an ICMP error.

A tcpdump trace returned the following data:


21:58:21.128201 YYY.YYY.YYY.YYY > XXX.XXX.XXX.XXX: icmp: dev.synnergy.net
protocol 0 unreachable [tos 0xd0] (ttl 255, id 24133)


As expected XXX.XXX.XXX.XXX was returned with an ICMP Type 3 Code 3 datagram,
once more we know the host is alive, thus another successful host detection
method.


Final Note

Further malformed packets could be used to generate arbitrary responses on a
host using invalid IP field values, this is left for the reader to analyse.
Most of these methods can be applied to most protocols such as IGMP or ARP as
a useful mechanism to detect firewalled hosts.

Implementing inbound and outbound traffic filters is a must for any network
wishing to avoid many forms of remote host detection. A proper rulebase and
effective ACL's should be thouroughly reviewed and tested as a standard means
of security practice.

By now the reader should be readily equipped with enough knowledge to
accurately interrogate such protocols to generate server responses as a means
of advanced host detection.



References

ICMP Scanning - by Ofir Afkin - www.sys-security.com
RFC 792 - Internet Control Message Protocol
RFC 1122 - Requirements for Internet hosts - communication layer


dethy@synnergy.net - Synnergy Networks - Copyright - 1998-2001
Login or Register to add favorites

File Archive:

March 2024

  • Su
  • Mo
  • Tu
  • We
  • Th
  • Fr
  • Sa
  • 1
    Mar 1st
    16 Files
  • 2
    Mar 2nd
    0 Files
  • 3
    Mar 3rd
    0 Files
  • 4
    Mar 4th
    32 Files
  • 5
    Mar 5th
    28 Files
  • 6
    Mar 6th
    42 Files
  • 7
    Mar 7th
    17 Files
  • 8
    Mar 8th
    13 Files
  • 9
    Mar 9th
    0 Files
  • 10
    Mar 10th
    0 Files
  • 11
    Mar 11th
    15 Files
  • 12
    Mar 12th
    19 Files
  • 13
    Mar 13th
    21 Files
  • 14
    Mar 14th
    38 Files
  • 15
    Mar 15th
    15 Files
  • 16
    Mar 16th
    0 Files
  • 17
    Mar 17th
    0 Files
  • 18
    Mar 18th
    10 Files
  • 19
    Mar 19th
    32 Files
  • 20
    Mar 20th
    46 Files
  • 21
    Mar 21st
    16 Files
  • 22
    Mar 22nd
    13 Files
  • 23
    Mar 23rd
    0 Files
  • 24
    Mar 24th
    0 Files
  • 25
    Mar 25th
    12 Files
  • 26
    Mar 26th
    31 Files
  • 27
    Mar 27th
    19 Files
  • 28
    Mar 28th
    42 Files
  • 29
    Mar 29th
    0 Files
  • 30
    Mar 30th
    0 Files
  • 31
    Mar 31st
    0 Files

Top Authors In Last 30 Days

File Tags

Systems

packet storm

© 2022 Packet Storm. All rights reserved.

Services
Security Services
Hosting By
Rokasec
close