Nmap is a utility for port scanning large networks, although it works fine for single hosts. Sometimes you need speed, other times you may need stealth. In some cases, bypassing firewalls may be required. Not to mention the fact that you may want to scan different protocols (UDP, TCP, ICMP, etc.). Nmap supports Vanilla TCP connect() scanning, TCP SYN (half open) scanning, TCP FIN, Xmas, or NULL (stealth) scanning, TCP ftp proxy (bounce attack) scanning, SYN/FIN scanning using IP fragments (bypasses some packet filters), TCP ACK and Window scanning, UDP raw ICMP port unreachable scanning, ICMP scanning (ping-sweep), TCP Ping scanning, Direct (non portmapper) RPC scanning, Remote OS Identification by TCP/IP Fingerprinting, and Reverse-ident scanning. Nmap also supports a number of performance and reliability features such as dynamic delay time calculations, packet timeout and retransmission, parallel port scanning, detection of down hosts via parallel pings.
0e9d4d6513ae6c79af9d9e7ea02fa05bUbuntu Security Notice 5009-1 - Qiuhao Li discovered that libslirp incorrectly handled certain header data lengths. An attacker inside a guest could possibly use this issue to leak sensitive information from the host. This issue only affected Ubuntu 20.04 LTS and Ubuntu 20.10. It was discovered that libslirp incorrectly handled certain udp packets. An attacker inside a guest could possibly use this issue to leak sensitive information from the host. Various other issues were also addressed.
ad0410070d31ba10efe5600d46f287ffThis is a proof of concept for a Windows TCP/IP denial of service vulnerability due to a NULL dereference in tcpip.sys. This was patched by Microsoft in February 2021. It is triggerable remotely by sending malicious UDP packet over IPv6.
603e905801bb4f31bf554bafa86b2826Nmap is a utility for port scanning large networks, although it works fine for single hosts. Sometimes you need speed, other times you may need stealth. In some cases, bypassing firewalls may be required. Not to mention the fact that you may want to scan different protocols (UDP, TCP, ICMP, etc.). Nmap supports Vanilla TCP connect() scanning, TCP SYN (half open) scanning, TCP FIN, Xmas, or NULL (stealth) scanning, TCP ftp proxy (bounce attack) scanning, SYN/FIN scanning using IP fragments (bypasses some packet filters), TCP ACK and Window scanning, UDP raw ICMP port unreachable scanning, ICMP scanning (ping-sweep), TCP Ping scanning, Direct (non portmapper) RPC scanning, Remote OS Identification by TCP/IP Fingerprinting, and Reverse-ident scanning. Nmap also supports a number of performance and reliability features such as dynamic delay time calculations, packet timeout and retransmission, parallel port scanning, detection of down hosts via parallel pings.
a071afc6a4b5f4a5dc93d1aef82dfa9dBACNet Test Server version 1.01 suffers from a denial of service vulnerability when sending a malformed BVLC Length UDP packet to port 47808 which causes the application to crash.
c18e464a43c74a4f96d0a72d9e0d01bdNmap is a utility for port scanning large networks, although it works fine for single hosts. Sometimes you need speed, other times you may need stealth. In some cases, bypassing firewalls may be required. Not to mention the fact that you may want to scan different protocols (UDP, TCP, ICMP, etc.). Nmap supports Vanilla TCP connect() scanning, TCP SYN (half open) scanning, TCP FIN, Xmas, or NULL (stealth) scanning, TCP ftp proxy (bounce attack) scanning, SYN/FIN scanning using IP fragments (bypasses some packet filters), TCP ACK and Window scanning, UDP raw ICMP port unreachable scanning, ICMP scanning (ping-sweep), TCP Ping scanning, Direct (non portmapper) RPC scanning, Remote OS Identification by TCP/IP Fingerprinting, and Reverse-ident scanning. Nmap also supports a number of performance and reliability features such as dynamic delay time calculations, packet timeout and retransmission, parallel port scanning, detection of down hosts via parallel pings.
c8bda5e6a7177c97efedccdcff00ef55Ubuntu Security Notice 4454-2 - USN-4454-1 fixed a vulnerability in Samba. This update provides the corresponding update for Ubuntu 12.04 ESM and Ubuntu 14.04 ESM. Martin von Wittich and Wilko Meyer discovered that Samba incorrectly handled certain empty UDP packets when being used as a AD DC NBT server. A remote attacker could possibly use this issue to cause Samba to crash, resulting in a denial of service. Various other issues were also addressed.
28286858828b581194abde5675e0a025Ubuntu Security Notice 4454-1 - Martin von Wittich and Wilko Meyer discovered that Samba incorrectly handled certain empty UDP packets when being used as a AD DC NBT server. A remote attacker could possibly use this issue to cause Samba to crash, resulting in a denial of service.
4d727511174b362f017cea4d57f55db7nullscan is a modular framework designed to chain and automate security tests. It parses target definitions from the command line and runs corresponding modules and their nullscan-tools afterwards. It can also take hosts and start nmap first in order to perform a basic portscan and run the modules afterwards. Also, nullscan can parse a given nmap logfile for open tcp and udp ports and again run the modules afterwards. All results will be logged in specified directories with a clean structure and an HTML report can subsequently be generated.
b19299719763dbf57f595ecbd3a3e226Nmap is a utility for port scanning large networks, although it works fine for single hosts. Sometimes you need speed, other times you may need stealth. In some cases, bypassing firewalls may be required. Not to mention the fact that you may want to scan different protocols (UDP, TCP, ICMP, etc.). Nmap supports Vanilla TCP connect() scanning, TCP SYN (half open) scanning, TCP FIN, Xmas, or NULL (stealth) scanning, TCP ftp proxy (bounce attack) scanning, SYN/FIN scanning using IP fragments (bypasses some packet filters), TCP ACK and Window scanning, UDP raw ICMP port unreachable scanning, ICMP scanning (ping-sweep), TCP Ping scanning, Direct (non portmapper) RPC scanning, Remote OS Identification by TCP/IP Fingerprinting, and Reverse-ident scanning. Nmap also supports a number of performance and reliability features such as dynamic delay time calculations, packet timeout and retransmission, parallel port scanning, detection of down hosts via parallel pings.
6ebfd22b0a7abdd67ed6acd361c7136dGNUnet is a peer-to-peer framework with focus on providing security. All peer-to-peer messages in the network are confidential and authenticated. The framework provides a transport abstraction layer and can currently encapsulate the network traffic in UDP (IPv4 and IPv6), TCP (IPv4 and IPv6), HTTP, or SMTP messages. GNUnet supports accounting to provide contributing nodes with better service. The primary service build on top of the framework is anonymous file sharing.
07bd9734306d96bbb2a21938c406ad77GNUnet is a peer-to-peer framework with focus on providing security. All peer-to-peer messages in the network are confidential and authenticated. The framework provides a transport abstraction layer and can currently encapsulate the network traffic in UDP (IPv4 and IPv6), TCP (IPv4 and IPv6), HTTP, or SMTP messages. GNUnet supports accounting to provide contributing nodes with better service. The primary service build on top of the framework is anonymous file sharing.
c73527d0f7380f96d02737dd41701c69GNUnet is a peer-to-peer framework with focus on providing security. All peer-to-peer messages in the network are confidential and authenticated. The framework provides a transport abstraction layer and can currently encapsulate the network traffic in UDP (IPv4 and IPv6), TCP (IPv4 and IPv6), HTTP, or SMTP messages. GNUnet supports accounting to provide contributing nodes with better service. The primary service build on top of the framework is anonymous file sharing.
a9cff50c834c581034d2771e74a3cc72Avahi-daemon in Avahi version through 0.7 inadvertently sends Legacy Unicast Responses to IPv4 unicast queries with source addresses that are not link-local, which allows remote attackers to cause a denial of service (traffic amplification) or obtain potentially sensitive information via port-5353 UDP packets.
cddcb2a1458450dea8496f3e63c102ccRed Hat Security Advisory 2018-2331-01 - memcached is a high-performance, distributed memory object caching system, generic in nature, but intended for use in speeding up dynamic web applications by alleviating database load. Security fix: memcached: UDP server support allows spoofed traffic amplification DoS For more details about the security issue, including the impact, a CVSS score, and other related information, refer to the CVE page listed in the References section. Issues addressed include a denial of service vulnerability.
238360ec1fbe236ebadd8dc1d45feff9This Metasploit module attempts to gain root privileges on Linux systems by abusing UDP Fragmentation Offload (UFO). This exploit targets only systems using Ubuntu (Trusty / Xenial) kernels 4.4.0-21 <= 4.4.0-89 and 4.8.0-34 <= 4.8.0-58, including Linux distros based on Ubuntu, such as Linux Mint. The target system must have unprivileged user namespaces enabled and SMAP disabled. Bypasses for SMEP and KASLR are included. Failed exploitation may crash the kernel. This Metasploit module has been tested successfully on various Ubuntu and Linux Mint systems, including: Ubuntu 14.04.5 4.4.0-31-generic x64 Desktop; Ubuntu 16.04 4.8.0-53-generic; Linux Mint 17.3 4.4.0-89-generic; Linux Mint 18 4.8.0-58-generic
365cc8e31e8378f416a359810066fcdaMalbait is a honeypot written in perl. It creates fake servers and supports both TCP and UDP protocols, either singly or in combination. It outputs in CSV format as well as giving more detailed text reports. You can serve fake Telnet, FTP, SMTP, POP3, HTTP, TR-69, IMAP, asciitime, systat and echo servers, as well as serving blank or random output.
f51667a675e30504d2bfc0f0895042e9GNUnet is a peer-to-peer framework with focus on providing security. All peer-to-peer messages in the network are confidential and authenticated. The framework provides a transport abstraction layer and can currently encapsulate the network traffic in UDP (IPv4 and IPv6), TCP (IPv4 and IPv6), HTTP, or SMTP messages. GNUnet supports accounting to provide contributing nodes with better service. The primary service build on top of the framework is anonymous file sharing.
808b7aeee1439935e3e061b3bd84d3dbReptile is a Linux kernel module rootkit that hides files, processes, etc. It implements ICMP/UDP/TCP port-knocking backdoors, supports kernels 2.6.x/3.x/4.x, and more.
0a1d449c8d146ccda6f1aaa0a27c3261This Metasploit module exploits an authentication bypass vulnerability in the infosvr service running on UDP port 9999 on various ASUS routers to execute arbitrary commands as root. This Metasploit module launches the BusyBox Telnet daemon on the port specified in the TelnetPort option to gain an interactive remote shell. This Metasploit module was tested successfully on an ASUS RT-N12E with firmware version 2.0.0.35. Numerous ASUS models are reportedly affected, but untested.
0b841685aaa09cefb0a9621293d64a94Nmap is a utility for port scanning large networks, although it works fine for single hosts. Sometimes you need speed, other times you may need stealth. In some cases, bypassing firewalls may be required. Not to mention the fact that you may want to scan different protocols (UDP, TCP, ICMP, etc.). Nmap supports Vanilla TCP connect() scanning, TCP SYN (half open) scanning, TCP FIN, Xmas, or NULL (stealth) scanning, TCP ftp proxy (bounce attack) scanning, SYN/FIN scanning using IP fragments (bypasses some packet filters), TCP ACK and Window scanning, UDP raw ICMP port unreachable scanning, ICMP scanning (ping-sweep), TCP Ping scanning, Direct (non portmapper) RPC scanning, Remote OS Identification by TCP/IP Fingerprinting, and Reverse-ident scanning. Nmap also supports a number of performance and reliability features such as dynamic delay time calculations, packet timeout and retransmission, parallel port scanning, detection of down hosts via parallel pings.
0003e4361ea844a40496678c8e58b1c2Red Hat Security Advisory 2018-0479-01 - Red Hat JBoss Enterprise Application Platform is a platform for Java applications based on the JBoss Application Server. This release of Red Hat JBoss Enterprise Application Platform 7.1.1 serves as a replacement for Red Hat JBoss Enterprise Application Platform 7.1.0, and includes bug fixes and enhancements, which are documented in the Release Notes document linked to in the References. Security Fix: artemis/hornetq: memory exhaustion via UDP and JGroups discovery.
259576d5f2a9f84d920d43dedfd48442Red Hat Security Advisory 2018-0480-01 - Red Hat JBoss Enterprise Application Platform is a platform for Java applications based on the JBoss Application Server. This release of Red Hat JBoss Enterprise Application Platform 7.1.1 serves as a replacement for Red Hat JBoss Enterprise Application Platform 7.1.0, and includes bug fixes and enhancements, which are documented in the Release Notes document linked to in the References. Security Fix: artemis/hornetq: memory exhaustion via UDP and JGroups discovery.
4c4302335c4e66677010e10354a505c5Red Hat Security Advisory 2018-0478-01 - Red Hat JBoss Enterprise Application Platform is a platform for Java applications based on the JBoss Application Server. This release of Red Hat JBoss Enterprise Application Platform 7.1.1 serves as a replacement for Red Hat JBoss Enterprise Application Platform 7.1.0, and includes bug fixes and enhancements. Security Fix: artemis/hornetq: memory exhaustion via UDP and JGroups discovery.
6a5745332005cb51b0c9baa88bb66504Ubuntu Security Notice 3588-1 - Daniel Shapira discovered an integer overflow issue in Memcached. A remote attacker could use this to cause a denial of service. It was discovered that Memcached listened to UDP by default. A remote attacker could use this as part of a distributed denial of service attack.
d801359fde7a431a2661008a3f1439a6
© 2020 Packet Storm. All rights reserved.
%7Cutmcsr%3D(direct)%7Cutmcmd%3D(none)){kind=small}
Follow us on Twitter
Follow us on Facebook
Subscribe to an RSS Feed