what you don't know can hurt you
Home Files News &[SERVICES_TAB]About Contact Add New

sequence_attacks.txt

sequence_attacks.txt
Posted Aug 17, 1999

No information is available for this file.

tags | paper
SHA-256 | 4578d23914c6cbe803decb378ceef46d3b6f84b5a659559f38c299c3d6136bed

sequence_attacks.txt

Change Mirror Download


Sequence Number Attacks

By Rik Farrow

Kevin Mitnick's alleged attack on Tsutomu Shimomura's Computers
used a vulnerability in TCP/IP and mistaken trust.

Questions regarding this article should be directed to the author
at rik@spirit.com.

December 25, 1994 found Tsutomu Shimomura, a computational
physicist for the San Diego Supercomputer Center, on his way to
the Sierra Nevadas to go skiing. He had left his personal network
of computers running at his beach cottage in Del Mar, just north
of San Diego. Perhaps it is fortunate for us he did so.

Just after two o'clock in the afternoon, Shimomura's home systems
were probed, then successfully attacked using something new in
Internet attacks, sequence number guessing. Shimomura also works
as a security expert, which made his systems both desirable
targets for attack, and allows us to understand in detail what
happened. Because, unlike most networks, Shimomura was using
tcpdump to monitor traffic incoming from his Internet connection,
and routinely sent his logs to an offsite location.

Sequence number guessing is not really new. Steve Bellovin, a
researcher at Bell Labs, and co-author of the Firewalls and
Internet Security book (Addison-Wesley, 1994, ISBN 0-201-63357-4),
included details of an attack scenario in his 1989 paper entitled
``Security Problems in the TCP/IP Protocol Suite''. But the
Christmas day attack is the first known use of the technique.

To better understand what happened, it helps to understand a
little about how TCP (Transport Control Protocol) works. TCP is
used for establishing bidirectional streams, like those used for
remote terminal connections (established with telnet or rlogin
utilities). TCP is also used for transferring large amounts of
data, for example with FTP or connecting to a Web server.

TCP provides a reliable connection. That is, unlike most other
parts of the Internet Protocol suite (such as ICMP, Internet
Control Message Protocol, or UDP, User Datagram Protocol), TCP
establishes a connection between the local and remote site. Once
the connection has been successfully established, groups of bytes
of data are acknowledged by sending a sequence number back to the
sending site. If the sending site does not receive an
acknowledgement quickly enough, it will resend the data. If the
sending site has resent the same data several times
unsuccessfully, it will send an error to the application saying
that the connection has been broken.

The sequence number is used to acknowledge receipt of data. At the
beginning of a TCP connection, the client sends a TCP packet with
an initial sequence number, but no acknowledgement (there can't be
one yet). If there is a server application running at the other
end of the connection, the server sends back a TCP packet with its
own initial sequence number, and an acknowledgement: the initial
sequence number from the client's packet plus one. When the client
system receives this packet, it must send back its own
acknowledgement: the server's initial sequence number plus one.
Thus, it takes three packets to establish a TCP connection (see
Part A of Figure 1 which shows the time-line diagram.

There's more to TCP, of course. You won't learn all about TCP in
this short article (try Doug Comer's book Internetworking with
TCP/IP, Volume 1, Principles, Protocols, and Architecture. Second
Edition (Prentice Hall, 1991 ISBN 0-13-468505-9) or W. Richard
Steven's TCP/IP Illustrated, Volume 1 (Addison-Wesley, 1993, ISBN
0-201-63346-9). For now, it's important to understand that TCP
packets include flag bits that get set to indicate conditions.
When you read Shimomura's account of the attack, he makes
reference to several flags.

The SYN flag (shown as a capital ``S'' in tcpdump command output)
indicates the initiation of a connection, and that an initial
sequence number is included. When the first packet is sent from
the client, only the SYN flag is set. When the server responds,
both the SYN flag and the ACK flag, indicating that a valid
acknowledgement is included, are set. From then on, the ACK flag
will be set, showing that each packet includes an acknowledgement
of a received packet.

The PUSH (shown as a capital ``P'') flag means that the data in
this packet should be pushed to the application, rathered than
queued until more data arrives. The RESET (``R'') flag tells TCP
to break (reset) the connection, and is sent when a client
attempts to connect to a server application that is not running.
In the attack, RESETs are used to close the half-open connections
used to keep the server busy.

The FIN bit (``F'') is used to close a connection. Each end of the
connection sends a packet with the FIN flag, which must be
acknowledged, so four packets are used to close a TCP connection.
Of course in the attack you won't see two FIN packets, because the
attacker never sees the responses from the target system, the X
terminal.

With this background, you are ready to read Shimomura's own
description, if you haven't already. Essentially, the attack
begins when several probes were launched from toad.com (a site
registered by Nebula Consulting). Although I don't know this for
sure, it is likely that toad.com had been broken into previously
using other techniques.

The probes, using finger, showmount, and rpcinfo (similar to
probes from SATAN, but not automatic) apparently helped the
attacker to determine a trust relationship between Shimomura's X
terminal (actually another workstation used as an X terminal), and
a local server. This was the real weakness exploited in the
attack. Shimomura's systems trusted one another, using the trust
mechanism exploited in the ``r'' commands like rsh and rcp.
Although convenient, and safe behind a strong perimeter defense,
trust has been used to break into systems for many years. The
November 1988 Internet Worm exploited trust in its automated
attacks.

In the next phase of the attack, thirty TCP SYN packets are sent
to the rlogin port of Shimomura's server. These packets come from
an unused Internet address, and their initial sequence numbers are
incremented by one instead of the more common 128,000. The purpose
of these packets are to fill the queue on the server with
half-open connections, so when the spoofing begins, the server
won't be able to respond to the packets being sent as
acknowledgements from the X terminal.

Next, a system at Loyola University of Chicago (apollo.it.luc.edu)
was used to probe the X terminal. Once again, a synthetic series
of TCP packets (initial sequence numbers incremented by one) gets
sent, but this time responses get sent back to a real site. It is
the responses that the attacker is after, because each response
contains an initial sequence number from the X terminal. In
Shimomura's paper tcpdump labels the responses with
x-terminal.shell > apollo.it.luc.edu.1000 S, indicating a packet
with the SYN flag set. If we subtract the first initial sequence
number from the second, 2021952000-2021824000, we get 128,000, a
pattern that holds for all twenty probes. So now the attacker
knows that the next initial sequence number will be 128,000
greater than the previous one.

The stage is now set for abusing the trust between the X terminal
and the server. The attacker generates packets that appear to come
from the server to open a TCP connection with the X terminal
rshell daemon. The X terminal sends an acknowledgement back to the
server, but this acknowledgement gets stuck in the queue. Next,
the attacker generates the acknowledgement the server might have
sent (if it had really been the server initiating the connection).
Now there is an open TCP connection from the X terminal to the
server, which is being spoofed by the server. Figure 1B shows how
the packets actually traveled.

Because the X terminal trusts the server, the attacker,
masquerading as root, sends the command "echo + + >> /.rhosts" to
the X terminal, extending trust to ANY root user with access to
this system. Then the attacker closes the connection by sending a
packet with FIN set, and acknowledging the FIN packet never seen
from the X terminal. Finally, thirty RESETs are sent to the server
to clear its queue. At this point, the server would send a RESET
to the X terminal to close the rshell connection it never made
(the one spoofed by the attacker), but it is now too late. The
attacked can now log in as root on the X terminal using rlogin.

There was more to the attack, but I'd like to save taking over TCP
connections for another day. There is also a CERT advisory about
this attack, which you can read.

Copyright © 1995-1997 The McGraw-Hill Companies, Inc.
All Rights Reserved.
Edited by Becca Thomas / editor@unixworld.com




-------------------------------------------------------------------------------



Network Working Group S. Bellovin
Request for Comments: 1948 AT&T Research
Category: Informational May 1996

Defending Against Sequence Number Attacks

Status of This Memo

This memo provides information for the Internet community. This memo
does not specify an Internet standard of any kind. Distribution of
this memo is unlimited.

Abstract

IP spoofing attacks based on sequence number spoofing have become a
serious threat on the Internet (CERT Advisory CA-95:01). While
ubiquitous crypgraphic authentication is the right answer, we propose
a simple modification to TCP implementations that should be a very
substantial block to the current wave of attacks.

Overview and Rational

In 1985, Morris [1] described a form of attack based on guessing what
sequence numbers TCP [2] will use for new connections. Briefly, the
attacker gags a host trusted by the target, impersonates the IP
address of the trusted host when talking to the target, and completes
the 3-way handshake based on its guess at the next initial sequence
number to be used. An ordinary connection to the target is used to
gather sequence number state information. This entire sequence,
coupled with address-based authentication, allows the attacker to
execute commands on the target host.

Clearly, the proper solution is cryptographic authentication [3,4].
But it will quite a long time before that is deployed. It has
therefore been necessary for many sites to restrict use of protocols
that rely on address-based authentication, such as rlogin and rsh.
Unfortunately, the prevalence of "sniffer attacks" -- network
eavesdropping (CERT Advisory CA-94:01) -- has rendered ordinary
TELNET [5] very dangerous as well. The Internet is thus left without
a safe, secure mechanism for remote login.

We propose a simple change to TCP implementations that will block
most sequence number guessing attacks. More precisely, such attacks
will remain possible if and only if the Bad Guy already has the
ability to launch even more devastating attacks.

Bellovin Informational [Page 1]
----------------------------------------------------------------------------

RFC 1948 Sequence Number Attacks May 1996

Details of the Attack

In order to understand the particular case of sequence number
guessing, one must look at the 3-way handshake used in the TCP open
sequence [2]. Suppose client machine A wants to talk to rsh server
B. It sends the following message:

A->B: SYN, ISNa

That is, it sends a packet with the SYN ("synchronize sequence
number") bit set and an initial sequence number ISNa.

B replies with

B->A: SYN, ISNb, ACK(ISNa)

In addition to sending its own initial sequence number, it
acknowledges A's. Note that the actual numeric value ISNa must
appear in the message.

A concludes the handshake by sending

A->B: ACK(ISNb)

The initial sequence numbers are intended to be more or less random.
More precisely, RFC 793 specifies that the 32-bit counter be
incremented by 1 in the low-order position about every 4
microseconds. Instead, Berkeley-derived kernels increment it by a
constant every second, and by another constant for each new
connection. Thus, if you open a connection to a machine, you know to
a very high degree of confidence what sequence number it will use for
its next connection. And therein lies the attack.

The attacker X first opens a real connection to its target B -- say,
to the mail port or the TCP echo port. This gives ISNb. It then
impersonates A and sends

Ax->B: SYN, ISNx

where "Ax" denotes a packet sent by X pretending to be A.

B's response to X's original SYN (so to speak)

B->A: SYN, ISNb', ACK(ISNx)

Bellovin Informational [Page 2]
----------------------------------------------------------------------------

RFC 1948 Sequence Number Attacks May 1996

goes to the legitimate A, about which more anon. X never sees that
message but can still send

Ax->B: ACK(ISNb')

using the predicted value for ISNb'. If the guess is right -- and
usually it will be -- B's rsh server thinks it has a legitimate
connection with A, when in fact X is sending the packets. X can't
see the output from this session, but it can execute commands as more
or less any user -- and in that case, the game is over and X has won.

There is a minor difficulty here. If A sees B's message, it will
realize that B is acknowledging something it never sent, and will
send a RST packet in response to tear down the connection. There are
a variety of ways to prevent this; the easiest is to wait until the
real A is down (possibly as a result of enemy action, of course). In
actual practice, X can gag A by exploiting a very common
implementation bug; this is described below.

The Fix

The choice of initial sequence numbers for a connection is not
random. Rather, it must be chosen so as to minimize the probability
of old stale packets being accepted by new incarnations of the same
connection [6, Appendix A]. Furthermore, implementations of TCP
derived from 4.2BSD contain special code to deal with such
reincarnations when the server end of the original connection is
still in TIMEWAIT state [7, pp. 945]. Accordingly, simple
randomization, as suggested in [8], will not work well.

But duplicate packets, and hence the restrictions on the initial
sequence number for reincarnations, are peculiar to individual
connections. That is, there is no connection, syntactic or semantic,
between the sequence numbers used for two different connections. We
can prevent sequence number guessing attacks by giving each
connection -- that is, each 4-tuple of <localhost, localport,
remotehost, remoteport> -- a separate sequence number space. Within
each space, the initial sequence number is incremented according to
[2]; however, there is no obvious relationship between the numbering
in different spaces.

The obvious way to do this is to maintain state for dead connections,
and the easiest way to do that is to change the TCP state transition
diagram so that both ends of all connections go to TIMEWAIT state.
That would work, but it's inelegant and consumes storage space.
Instead, we use the current 4 microsecond timer M and set

ISN = M + F(localhost, localport, remotehost, remoteport).

Bellovin Informational [Page 3]
----------------------------------------------------------------------------

RFC 1948 Sequence Number Attacks May 1996

It is vital that F not be computable from the outside, or an attacker
could still guess at sequence numbers from the initial sequence
number used for some other connection. We therefore suggest that F
be a cryptographic hash function of the connection-id and some secret
data. MD5 [9] is a good choice, since the code is widely available.
The secret data can either be a true random number [10], or it can be
the combination of some per-host secret and the boot time of the
machine. The boot time is included to ensure that the secret is
changed on occasion. Other data, such as the host's IP address and
name, may be included in the hash as well; this eases administration
by permitting a network of workstations to share the same secret data
while still giving them separate sequence number spaces. Our
recommendation, in fact, is to use all three of these items: as
random a number as the hardware can generate, an administratively-
installed pass phrase, and the machine's IP address. This allows for
local choice on how secure the secret is.

Note that the secret cannot easily be changed on a live machine.
Doing so would change the initial sequence numbers used for
reincarnated connections; to maintain safety, either dead connection
state must be kept or a quiet time observed for two maximum segment
lifetimes after such a change.

A Common TCP Bug

As mentioned earlier, attackers using sequence number guessing have
to "gag" the trusted machine first. While a number of strategies are
possible, most of the attacks detected thus far rely on an
implementation bug.

When SYN packets are received for a connection, the receiving system
creates a new TCB in SYN-RCVD state. To avoid overconsumption of
resources, 4.2BSD-derived systems permit only a limited number of
TCBs in this state per connection. Once this limit is reached,
future SYN packets for new connections are discarded; it is assumed
that the client will retransmit them as needed.

When a packet is received, the first thing that must be done is a
search for the TCB for that connection. If no TCB is found, the
kernel searches for a "wild card" TCB used by servers to accept
connections from all clients. Unfortunately, in many kernels this
code is invoked for any incoming packets, not just for initial SYN
packets. If the SYN-RCVD queue is full for the wildcard TCB, any new
packets specifying just that host and port number will be discarded,
even if they aren't SYN packets.

Bellovin Informational [Page 4]
----------------------------------------------------------------------------

RFC 1948 Sequence Number Attacks May 1996

To gag a host, then, the attacker sends a few dozen SYN packets to
the rlogin port from different port numbers on some non-existent
machine. This fills up the SYN-RCVD queue, while the SYN+ACK packets
go off to the bit bucket. The attack on the target machine then
appears to come from the rlogin port on the trusted machine. The
replies -- the SYN+ACKs from the target -- will be perceived as
packets belonging to a full queue, and will be dropped silently.
This could be avoided if the full queue code checked for the ACK bit,
which cannot legally be on for legitimate open requests. If it is
on, RST should be sent in reply.

Security Considerations

Good sequence numbers are not a replacement for cryptographic
authentication. At best, they're a palliative measure.

An eavesdropper who can observe the initial messages for a connection
can determine its sequence number state, and may still be able to
launch sequence number guessing attacks by impersonating that
connection. However, such an eavesdropper can also hijack existing
connections [11], so the incremental threat isn't that high. Still,
since the offset between a fake connection and a given real
connection will be more or less constant for the lifetime of the
secret, it is important to ensure that attackers can never capture
such packets. Typical attacks that could disclose them include both
eavesdropping and the variety of routing attacks discussed in [8].

If random numbers are used as the sole source of the secret, they
MUST be chosen in accordance with the recommendations given in [10].

Acknowledgments

Matt Blaze and Jim Ellis contributed some crucial ideas to this RFC.
Frank Kastenholz contributed constructive comments to this memo.

References

[1] R.T. Morris, "A Weakness in the 4.2BSD UNIX TCP/IP Software",
CSTR 117, 1985, AT&T Bell Laboratories, Murray Hill, NJ.

[2] Postel, J., "Transmission Control Protocol", STD 7, RFC 793,
September 1981.

[3] Kohl, J., and C. Neuman, "The Kerberos Network Authentication
Service (V5)", RFC 1510, September 1993.

[4] Atkinson, R., "Security Architecture for the Internet
Protocol", RFC 1825, August 1995.

Bellovin Informational [Page 5]
----------------------------------------------------------------------------

RFC 1948 Sequence Number Attacks May 1996

[5] Postel, J., and J. Reynolds, "Telnet Protocol Specification",
STD 8, RFC 854, May 1983.

[6] Jacobson, V., Braden, R., and L. Zhang, "TCP Extension for
High-Speed Paths", RFC 1885, October 1990.

[7] G.R. Wright, W. R. Stevens, "TCP/IP Illustrated, Volume 2",
1995. Addison-Wesley.

[8] S. Bellovin, "Security Problems in the TCP/IP Protocol Suite",
April 1989, Computer Communications Review, vol. 19, no. 2, pp.
32-48.

[9] Rivest, R., "The MD5 Message-Digest Algorithm", RFC 1321,
April 1992.

[10] Eastlake, D., Crocker, S., and J. Schiller, "Randomness
Recommendations for Security", RFC 1750, December 1994.

[11] L. Joncheray, "A Simple Active Attack Against TCP, 1995, Proc.
Fifth Usenix UNIX Security Symposium.

Author's Address

Steven M. Bellovin
AT&T Research
600 Mountain Avenue
Murray Hill, NJ 07974

Phone: (908) 582-5886
EMail: smb@research.att.com

----------------------------------------------------------------------------
Login or Register to add favorites

File Archive:

March 2024

  • Su
  • Mo
  • Tu
  • We
  • Th
  • Fr
  • Sa
  • 1
    Mar 1st
    16 Files
  • 2
    Mar 2nd
    0 Files
  • 3
    Mar 3rd
    0 Files
  • 4
    Mar 4th
    32 Files
  • 5
    Mar 5th
    28 Files
  • 6
    Mar 6th
    42 Files
  • 7
    Mar 7th
    17 Files
  • 8
    Mar 8th
    13 Files
  • 9
    Mar 9th
    0 Files
  • 10
    Mar 10th
    0 Files
  • 11
    Mar 11th
    15 Files
  • 12
    Mar 12th
    19 Files
  • 13
    Mar 13th
    21 Files
  • 14
    Mar 14th
    38 Files
  • 15
    Mar 15th
    15 Files
  • 16
    Mar 16th
    0 Files
  • 17
    Mar 17th
    0 Files
  • 18
    Mar 18th
    10 Files
  • 19
    Mar 19th
    32 Files
  • 20
    Mar 20th
    46 Files
  • 21
    Mar 21st
    16 Files
  • 22
    Mar 22nd
    13 Files
  • 23
    Mar 23rd
    0 Files
  • 24
    Mar 24th
    0 Files
  • 25
    Mar 25th
    12 Files
  • 26
    Mar 26th
    31 Files
  • 27
    Mar 27th
    19 Files
  • 28
    Mar 28th
    42 Files
  • 29
    Mar 29th
    0 Files
  • 30
    Mar 30th
    0 Files
  • 31
    Mar 31st
    0 Files

Top Authors In Last 30 Days

File Tags

Systems

packet storm

© 2022 Packet Storm. All rights reserved.

Services
Security Services
Hosting By
Rokasec
close